How Do I Connect the Speakers to My TV

Televisions have built-in speakers, but their size is limited because modern televisions are as compact and thin as possible. Many TV owners buy external speakers for better sound quality. You can upgrade your TV sound system and enjoy your favorite shows by adding speakers like a home theater system or an amplifier. This article will show you how to connect speakers to a TV.

What do You Need to Know Before You Start?

It is advisable to keep the manuals for your television and audio system close at hand. If you can’t find them, download them from the manufacturer’s website. Remember, we’re talking about connecting the output terminals on the TV to the input terminals on the speakers. Refer to manuals to find out where to find these connections and your TV options.

Another thing to keep in mind is that you may need to configure some settings on the TV before connecting to external speakers. If you don’t have this option, you can turn the TV volume all the way down and use the volume controls on your external speakers.

How do i connect speakers to my TV

Can You Connect Speakers Directly to a TV?

No, you cannot connect the speakers directly to the TV. Televisions do not have speaker outputs that speakers can drive. However, most TVs have audio line-outs that you can use to connect them to speakers. A small external amplifier or the home stereo receiver is a great option.

Different Ways to Connect Speakers to the TV

Here, we discuss some ways to connect speakers to the TV:

Connect With a Speaker Cable

Here are the steps to connect the speakers to the TV with a speaker cord.

  • Look for the color-coded audio output jacks on the back of your TV or cable box. Usually, the RCA audio output sockets are colored red and white.
  • Plug the red cinch audio cable into the red cinch audio socket on your television and the white cinch audio cable into your white cinch audio socket. To improve the sound quality of your speakers, make sure that the color-coded jacks and plugs match properly.
  • Turn on your TV and check each speaker one at a time. When two or all of the speakers are operating at the same time, it is difficult to hear the performance of a single speaker. To hear the output, unplug all other speakers except the one you are checking. Repeat this process for all other speakers and check the connections of the speakers that are having problems.

Note: If your television cannot send an audio signal to your external device, find the audio settings of your television using the “Menu” button on your remote control. When you’ve done that, find the Sound Options or Sound menu and choose an entry called Sound Output, or just Output. From there, you should be able to choose which output the TV should use to power your system.

Connect Through an Amplifier or Receiver

  • Find the RCA audio output jacks on the back of your TV. The two color-coded audio input/output sockets (red and white) transmit the audio signals from the television to the amplifier via cinch cables. On the back of your amplifier or receiver, find the RCA audio input jacks.
  • Connect one end of the red cinch audio cable to the back of the red cinch socket on the television and then to the rear of the red cinch socket on the amplifier. Do the same for the white RCA audio cable.
  • Connect the left, right, center, and rear speakers to the amplifier by plugging the speaker cords into the appropriate jacks or terminals on the amplifier. When connecting the positive wires to the positive poles and the negative wires to the negative poles, ensure that the polarity is correct. The red wires should be connected to the positive terminals while the negative terminals should be connected to the black wires.

Connect the Bluetooth Enabled Speaker to the TV

Digital TVs come with Bluetooth audio streaming that can improve sound quality in a number of ways. This design allows you to wirelessly connect to a portable Bluetooth speaker. To watch your favorite series at night or improve the sound of the hearing impaired viewers, wireless Bluetooth headphones are a good choice.

It will be a good option to select from the best Bluetooth speakers that are available in different ranges in the market. They are great to comfort you in listening to music with good sound quality either you are in-home or on the way.

You can connect a Bluetooth transmitter like the Soundcast VGtx to a 3.5mm optical or analog output if you have an older model of TV. Using Bluetooth on some TVs disables the device’s built-in speakers and analog / digital audio outputs. This way, you can only hear the sound through the wireless speakers.

What to Do If There Is No Sound From the Speakers?

If there is no sound, first check that the Speaker A / B switch is on. When the switch is off, no sound will be allowed through the speaker system.

Another area that you can check if you don’t hear any sound after connecting the speakers to the TV is in the TV menu. If your TV has this option, you may need to turn off the internal speakers and turn on the audio output on the TV.

Your audio system itself may have a pause or mute feature that, when activated, prevents the sound from passing through the TV to the speakers. If your TV volume is turned down or off and the stereo volume is muted, it may seem like something is broken when you need to pick up one or both of the devices.

Surround speakers that support Bluetooth can connect to a nearby phone during the setup process (this can happen accidentally when you click buttons during setup). If you suspect this could be the reason why the speakers are not playing sound on the TV, restart the speaker system and temporarily turn off Bluetooth on all nearby devices.

If anything, connecting the audio cables might be the only step you’re sure you got right, but even that may not always work the first time. Some cables can be pushed in just enough to stay in place, but not far enough to function properly. Double-check all of the cables by unplugging them, this time pressing harder to make sure they click into place. If the speaker volume is increased, proper attachment of the audio cables should produce a sound.

Leave a Reply

Your email address will not be published.

Back to top button